There are 16 products.
The Konica Minolta KM1024 MH print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
This printhead also come with name
UJF-3042 GEN4 7PL Printhead Ref. N220792J - DP part: PPHRI12737
TX400-1800D Head Assy – M011941 Ref. M011941 - DP part: PPHMI16339
The Konica Minolta KM1024 LN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
The Konica Minolta KM1024 SHB print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
This printhead has an integrated heater and thermistor. This is the original Ricoh printhead which corresponds to Mimaki part number M011941. It is covered by a manufacturer warranty. This GEN4 printhead has a 44cm long cable and 4 hose barb ink inlets.
It supports up to four colours and has a total of 1.280 nozzles.
It is built with longevity and robustness in mind and used in the latest industrial inkjet printers. This is Ricoh original printhead and it is covered by a manufacturer warranty. This Ricoh GEN5 is available in two different cable lengths: 140mm or 390mm.
The Konica Minolta KM512 LN print head has 512 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. It is compatible with oil based, solvent and UV inks. This print head is also known as the Konica Minolta KM512 LNX. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty.
This printhead has an integrated heater and thermistor. This is the Ricoh original printhead, covered by a manufacturer warranty.This printhead correspond to Mimaki part number M010010. This part includes the damper adapter M014497.
The Konica Minolta KM512 LNX-35 print head is a robust print head ,
shear mode, piezo on-demand print head that is usable in binary mode
only.
It is built with longevity and robustness in mind and used in the latest industrial inkjet printers. This is Ricoh original printhead part (number MH5420) and it is covered by a manufacturer warranty. This Ricoh GEN5 is available in two different cable lengths (connector included): 140mm or 390mm.
print quality without the use of additional print heads. The Konica Minolta KM512 MH print head has 512 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi.
The Konica Minolta KM512 LH print head is a robust, shear mode, piezo on-demand print head that is usable in binary mode only.
The Konica Minolta KM1024i MHE printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure. In contrast with the existing 3-cycle system drive, an independent drive system that enables simultaneous emission from all 1024 nozzles has been adopted.
The Konica Minolta KM1024i 6988H printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure.
