There are 17 products.
The Konica Minolta KM1024 MH print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
Original Mutoh Drafstation RJ-900C / 901C dx5 Printhead - DG-44246
The Konica Minolta KM1024 LN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
This printhead is either used in 4-colours (2 channels per colour) and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for this print head is 8 kHz.
The Konica Minolta KM1024 SHB print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
The VJ-1638 printhead Assy has a native resolution of 360 dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.
The Mutoh VJ-1618 printhead (sixth generation micro-piezo print head) has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.
The Konica Minolta KM512 LN print head has 512 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. It is compatible with oil based, solvent and UV inks. This print head is also known as the Konica Minolta KM512 LNX. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty.
This is the original Epson DX4 RJ-8000 Head Assy printhead, delivered in a sealed Roland original package. This print head is compatible with a wide range of printers as specified in compatibility.
Remarks: Original Part number: 228054740
The Konica Minolta KM512 LNX-35 print head is a robust print head ,
shear mode, piezo on-demand print head that is usable in binary mode
only.
To be used with: Mutoh ValueJet 1324 / ValueJet1624 / ValueJet 1624W / ValueJet 1924W
Remarks: Original
Part no.: 6701409010
This print head is suitable for Mutoh Drafstation printers. This is the original Mutoh printhead (part number DF-49029) with a Mutoh 40 digit head ID. This printhead is intended to be used with water based inks. Please refer to PPHMUVJ1204 for the 24 digit head ID solvent based Mutoh printhead.
print quality without the use of additional print heads. The Konica Minolta KM512 MH print head has 512 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi.
The Konica Minolta KM512 LH print head is a robust, shear mode, piezo on-demand print head that is usable in binary mode only.
The Konica Minolta KM1024i MHE printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure. In contrast with the existing 3-cycle system drive, an independent drive system that enables simultaneous emission from all 1024 nozzles has been adopted.
The Konica Minolta KM1024i 6988H printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure.
